- Overview
- Product Description
- Product Parameters
- Detailed Photos
- Company Profile
Basic Info.
Model NO.
ADS-ICD
Fuction
Vibration Reduction
Load Range
1.8-100kn
Natural Frequency
1.5Hz-3Hz
Model No.
ADS-ICD
Transport Package
Carton
Trademark
THERMOTEST
Origin
China
Production Capacity
5000
Product Description
With the air suspension element ADS, natural frequencies between 1.5 and 3 Hz can be achieved during machine installation.
The highly flexible diaphragm of the air suspension element ADS is characterized by its low inherent rigidity. Due to the available air volume and the highly flexible diaphragm, natural frequencies between 1.5 and 3 Hz can be achieved.
ADS-ICD construction
1.Membrane-based pneumatic spring element with housing, carrier and base plate made of aluminium
2.Natural frequencies 1.5 - 3 Hz
3.Elastomer-metal combination
4.with screwed on base plate
Delivery contents of standard ICD pneumatic spring system
1.3 pneumatic springs ADS type Master with sensors and control valves
2.1 pneumatic spring ADS type Slave without sensors and valves
3.1 control unit as 3-channel circuit board with RS-232 PC interface
4.Control cable for master elements
5.Hose NW 4 with cross piece or T-pieces
6.Power adapter
Options
1. Control unit: circuit board in synthetic enclosure
2. Connectors for control cable
3. Filter-regulator unit consisting of pressure regulator, pressure gauge, filter, water separator
4. Control cable: length of 3 control cables to customer specifications
5. "Air Level Control" software for PC (Windows)
6. USB cable
7. Additional hose sections and connectors according to number of pneumatic springs
Supply conditions
1. Compressed air: operating pressure 1 - 6 bar, dry, dust and oil free; alternative filter-regulator (FRK)
2. Control unit: Circuit board approx. 160 X 100 X 15 mm; alternative circuit board in synthetic housing approx. 225 X 200 X 40 mm
3. Power supply: 24 V -1A; alternative power adapter, input 230 V, 50 Hz, 130 Watt,output 24 V, 1A, DC
4. Commissioning and adjusting of pneumatic spring system as well as operator training by staff upon request
The basic version of the ICD pneumatic spring system is factory-programmed. However, the software allows varying the following parameters: reset accuracy, permissible deflection, response time, average level. These parameters can be viewed, freely chosen within wide limits, and permanently stored in the control unit. The values are retained even after a power failure. The factory default settings are documented in a datasheet.
| Model | D(mm) | H0(mm) | Ni(mm) | A(mm) | Max. Load(kN) |
| ADS 3 | 105 | 65 | ± 5 | 106 | 1.8 |
| ADS 6 | 127 | 90 | ± 6 | 130 | 2.8 |
| ADS 12 | 175 | 90 | ± 6 | 175 | 6.0 |
| ADS 24 | 245 | 90 | ± 6 | 255 | 13.0 |
| ADS 48 | 338 | 90 | ± 6 | 343 | 26.0 |
| ADS 96 | 468 | 90 | ± 6 | 470 | 55.0 |
| ADS 192 | 610 | 90 | ± 6 | 610 | 100.0 |
